Vibration and Harmonic Response

Step 4: Specify geometry

Create Keypoints

Select in Preprocessor menu:

Modeling > Create > Keypoints > In Active CS

Enter:

Keypoint 1: X=0, Y=0
Keypoint 2: X=0, Y=3
Keypoint 3: X=2, Y=3

Click OK.

Create the Lines AB and BC

Select in Preprocessor menu:

Modeling > Create> Lines > Lines > In Active Coord

Select keypoint 1 followed by keypoint 2.

Click OK.

Select keypoint 2 followed by keypoint 3.

Click OK.

Save your work

Click on SAVE_DB in the ANSYS Toolbar to save the database.

Go to Step 5: Mesh geometry